Asking: $ 1,550,000
Description
A well maintained Fleming 55 with plenty of recent upgrades and additions. Comes equipped with twin Cummins QSC 8.3 engines at 500 hp each and two Onan generators (all recently serviced 6/2024). The full exterior has been Ceramic Coated in 2024. Features include: Aqua-Drive thrust-bearing system, Naiad stabilizers, Sidepower bow & stern thrusters, Furuno NavNet 3D Black Box electronics, Starlink Wi-Fi, a fourth control/docking station at upper aft boat deck, FCI water maker, a custom fiberglass hardtop overhead, and a 12’ Nautica tender with 40hp Yamaha motor. Interior accommodations includes three staterooms and two heads: a forward en-suite master stateroom with a island queen berth, a port VIP stateroom with two twin berths & a third upper bunk, and a starboard cabin two bunk arrangement.
Note: New interior photos coming soon. This boat’s interior has been redone with all-new carpeting throughout entire boat. Most interior pictures in this listing show the new carpet, however the pilothouse pictures were taken before the new carpet install and show the old carpet. Updated interior pictures to come.
LOA-Hull | 55 |
LOA-Total | 60.75 |
BEAM | 16 |
DRAFT | 5 |
DISPLACEMENT | 68,000 lbs |
ENGINES | Cummins QSC 8.3 @ 500 hp |
HOURS | 2600 |
EFFICIENT CRUISE SPEED | 17 Kt |
HIGH CRUISE SPEED | 19 Kt |
FUEL CAPACITY | 1,000 gal |
WATER CAPACITY | 300 gal |
BLACKWATER CAPACITY | 100 gal |
Entering from the aft cockpit deck you are immediately greeted with a capacious salon. Featuring the timeless appeal of teak cabinetry, vast windows, teak sole with holly accents, and most importantly, an interior layout that balances form with function. This layout allows for an open social environment while keeping the function of the galley separated from the rest of the salon. With a 16’ beam and spacious open floor plan encompassing the salon with the galley, entertaining guests becomes effortless.
Starting at the aft port side corner is an icemaker fit within a teak cabinet with a granite countertop. Moving forward along the port side is a large L-shaped settee that wraps inboard around the front edge of the galley counter-top and is complimented by a teak hi-lo table. This settee, along with an additional settee at the starboard side, provides comfortable seating for six in the salon. The starboard side consists of a teak cabinet flip-top dry bar to forward of the settee, and a entertainment cabinet at the starboard aft corner. Here audio-video equipment is custom fit behind a teak cabinet and a 32” HD TV is situated on a retractable TV lift.
- Entertainment cabinet at starboard-aft corner, featuring a 32” HD TV on a retractable lift
- Wired for DirectTV receivers
- Samsung Blu-Ray player
- Apple TV in salon
- Sonos sound system installed throughout boat (2024)
- Salon speakers overhead
- Teak cabinet with flip top dry bar at starboard forward
- Settee to starboard—in between entertainment cabinet & flip top bar
- Large L-shaped settee to port
- Teak hi-lo table
- Icemaker at port-aft corner within teak cabinet with granite counter on top
- Teak & holly sole with new carpeting (2024)
- Overhead ceiling teak grab rail
- Salon blinds
- Phantom hideaway screen / privacy shade at salon doors
The galley is tucked to the port side just forward of the salon, which is separated by a large granite countertop peninsula and overhead galley cabinets. Within the inboard overhead cabinet is a dumbwaiter that can be accessed from a hatch up on the flybridge. Wrapping around the U-shaped counter of the galley you will find a black Silgranite double-bowl sink, 3-burner cooktop, dishwasher, oven, & trash compactor below, and a microwave overhead. Teak cabinets fill in the rest of the galley including storage compartments just forward of the cook top that can accommodate a full range of cookware. Across to the opposing starboard side is a dish storage compartment, additional storage drawers, and full-sized stainless steel refrigerator/freezer.
- Granite counter tops
- Kenyon 3-burner cook top—220v
- GE Profile microwave oven—stainless steel
- Miele oven—stainless steel (new 2024)
- Fisher-Paykel full-sized refrigerator/freezer—stainless steel (new 2023)
- Black Silgranite double-bowl sink
- Insinkerator waste disposal
- Grohe stainless steel mixer faucets
- Dishwasher—teak panel face
- Broan trash compactor—teak panel face
- Dumbwaiter to Flybridge
- Teak & holly sole with carpeting
Following the five short steps straight down from the salon will lead you to the central passage of the accommodations. This traditional layout has been a signature mainstay in the Fleming 55 and provides an easy and convenient flow of traffic throughout the boat. The central accommodations passage also makes it possible to appreciate the full length of the vessel from forepeak bulkhead to transom. Once in the passageway you will find an two bunk arrangement within the starboard cabin, along with a VIP guest stateroom to port featuring two twin-sized berths and a third overhead bunk. Just forward of the starboard side stateroom in the passageway is a full-sized Bosch Axxis 220v washer & separate dryer followed by the guest head. The en-suite master stateroom with a island-queen berth tops off the accommodations at the forward peak. The headboards of all berths have be recovered (2023).
The master stateroom is composed of a queen sized island berth surrounded by shelves, cabinets, drawers, and his & hers hanging lockers to each side. The island berth arrangement allows for access from either side and the berth can be raised with a hydraulic lift to access a large storage cavity underneath, perfect for storing extra bed linens or keeping valuables out of sight. Over head are two skylight hatches which along with port holes, provide natural light to the cabin. In between the two skylights is an emergency escape hatch that leads to the foredeck of the vessel. To the port side of the stateroom is a wall-mounted 24” Smart TV (2024) and access to the master head.
Both the master and guest heads are exceptionally spacious and feature one-piece molded fiberglass shower stalls, glass and stainless steel shower enclosures, mirrored vanities with Grohe thermostatic controlled fixtures, Headhunter systems, and granite countertops.
The port stateroom features two twin-sized berths with a night stand in-between and a third slide-out bunk overhead to outboard. At the foot of both berths is a wall mounted 15” Smart TV (2024) and a large hanging locker with dresser drawers below. Additional drawers are found beneath the berths and more storage in provided by the shelving along the walls overhead. The starboard cabin features a two bunk arrangement with storage drawers beneath, a hanging locker, and a full length mirror. A 13” Smart TV (2024) is mounted at the inboard wall of the cabin.
In many modern yacht designs it has become commonplace to eliminate the inside steering station, however the Fleming 55 features a dedicated pilothouse which closely resembles the bridge of a much larger vessel. This dedicated pilothouse takes the role as the primary location to control the boat without any distractions from other on-board activities. With that said, it remains only three short steps up from the salon & galley and it is only another four interior steps up to the flybridge.
Visibility forward and wrapping around to port and starboard windows is excellent. Below the expansive windshield are consoles which provide ample room for a full range of modern electronics and equipment without intruding on the engine instrumentation. Overhead consoles provide additional space for equipment within easy reach. Both AC and DC electrical breaker panels are below the console to either side and can swing out to provide access to wiring connections and backside of displays. There is a proper chart area to the starboard side with large drawers for maps, cruising guides, navigation instruments, binoculars, and other necessities. Centered along each port and starboard side of the pilothouse are sliding doors that lead out to the side Portuguese decks. To the aft of the port side-door resides a raised L-shaped settee and table which provides a comfortable social area with phenomenal visibility while underway. Aft of the starboard side-door you will find additional storage through a hanging locker and extra drawers. A large stainless steel teak-accented destroyer wheel and Stidd helm chair finish off the pilothouse and perfectly accent this ultimate cruising yacht.
- Furuno Radar—6’ open array
- Furuno NavNet 3D Black Box
- (2) NEC 21” monitors—to display NavNet 3D
- Furuno NavNet 3D stand-alone display unit (to starboard of console)
- Simrad AP28 autopilot
- (2) Furuno RD30 data units
- Furuno FA150 AIS
- Furuno Navtex NX-300
- (2) Icom M604 VHF
- Sidepower bow & stern thruster control
- Naiad Electronic Multisea II stabilizer control
- (2) Smartcraft digital engine displays
- Glendinning engine controls
- Stainless steel & teak accented destroyer wheel
- Rudder indicator
- Trim tab indicators & controls
- 13” Insignia TV to port side of console
- Hik CCTV camera system with (4) cameras and NVR recording (2024)
- (2) ACR spotlight control
- Oceanview night vision control
- Horn control
- Compass
- Auto-anchor control & chain counter
- FCI watermaker controls
- Remote fire extinguisher over ride
- Starlink satellite Wi-Fi system (2023)
- Sonos sound system throughout (2024)
- Inverter control panel
- Computank display
- Stidd helmseat
- Raised corner settee with teak table top
- Pilothouse hanging locker and storage cabinet
- Steps up to flybridge & salon access to aft wall
- Sliding doors to either side give access to exterior side decks / Portuguese bridge
The flybridge is easily accessed from the interior steps in the pilothouse or by the ladder from the cockpit. It features a two-seat upper helm station located to port that provides excellent visibility particularly in close quarters and bustling harbors with its 360 degree view. The electronics console is large enough to house an array of equipment with easy access to the rear of the console available by hinging open the bookshelf behind the pilothouse settee below. The starboard side of the flybridge features a wrap-around settee and a fixed fiberglass table with a varnished teak topper. Aft of the helm to the port side will find the hatch for the galley dumbwaiter followed by an additional settee. The following aft boat deck features a Steelhead 1,000 lbs hydraulic davit, mounted tender chocks, 12’ Nautica tender, and a Switlik 6-man liferaft. The hatch and step ladder to the cockpit resides to the aft port side of the boat deck, along with the aft control station. Overhead, a custom fiberglass hardtop with stainless steel supports is attached to the radar arch, which in turn supports the custom hinged mast, domes, and open array.
Flybridge Helm:
- (2) Furuno NavNet 3D stand-alone display unit
- Furuno RD-30 data unit
- Simrad AP24 autopilot
- Icom IC-M504 VHF
- Sidepower bow & stern thruster control
- (2) Smartcraft digital engine displays
- Engine start/stop
- Glendinning engine controls
- Stainless steel destroyer wheel
- Rudder Indicator
- Bennett trim tab controls
- ACR spotlight control
- Auto-anchor controls
- Horn
- Compass
- Remote fire extinguisher over ride
Flybridge Features:
- Fiberglass hardtop with stainless skylights and stainless supports & custom hinged mast
- Plexiglass windshield with stainless handrail
- Steering console with controls and engine instrumentation—bench seat
- U-shaped settee to starboard
- Additional settee to port
- Cushioned flybridge seating for 10 people —storage beneath settees and helm bench
- Molded fiberglass table to starboard with varnished teak topper
- Non-skid flybridge deck & aft boat deck
- Sliding hatch & step ladder leading down to cockpit
- Freshwater wash down
- Aft control station – engine & thruster controls
- Switlik 6-man liferaft (re-certified in 2023)
- EPIRB
- Steel Head SM1000 – 1,000 lb electric hydraulic davit with power rotation, slewing, hoisting (2023)
- Tender: 12’ Nautica Wide Body RIB with 40 hp Yamaha outboard – Icom M330 VHF (full tender & outboard service—June 2024)
- New flybridge exterior lighting (6/2024)
In common with all Flemings, the hull is hand laid and solid fiberglass reinforced with a grid of stringers and frames. Vinylester resin is utilized below and above the waterline on the hull with further protection provided by epoxy barrier coats. A reasonable five foot draft allows for Bahamas cruising while ensuring that the running gear is protected by a full-length keel which is foam filled and glassed across the top to isolate it from the hull. This keel provides nearly a foot length of protection before the running gear.
On deck she has the mainstay walk-around side decks and in combination with high bulwarks and a enclosed Portuguese bridge deck, security for both children and pets is ensured. The exterior decks are natural teak, while all of the cap rails and coaming boards throughout are comprised of varnished teak. The cockpit features a control station located starboard of the salon doors while a built-in cooler/ice box is to port behind the step-ladder that leads up to flybridge. On the cockpit deck are four gasketed and lockable hatches that provide access to the engine room and spacious lazarette. Finally, the transom of the cockpit features a large gate that swings in to allow ingress to the teak-decked swim platform.
Moving forward along the side decks you will discover entry gates on either side of the cockpit side decks. These gates provide lower entry close to the water line, meanwhile additional gates at either side of the raised Portuguese bridge give the option for a higher point of entry. Up to the bow will bring you to a teak foredeck with varnished teak handrails. Special attention has been paid to the ease and safety in which the heavy duty ground tackle is set and retrieved. The anchor platform accepts two anchors, each of which can be controlled by a handheld unit at the platform or by controls at both the pilothouse and flybridge helm stations. The anchor locker directly beneath the pulpit can serve as a great place for fender storage as well. Furthermore the inside wall of the Portuguese bridge includes two storage cabinets that give convenient storage for dock lines, windshield covers, and cleaning supplies.
- Built to European CE certification standards for ocean class
- Hand-laid solid fiberglass hull
- Ceramic Coating applied to full exterior in 2024
- Vinylester resin utilized above & below waterline
- Stainless steel protective shoe on keel
- Simulated planking grooves in hullside
- Integrated molded guards with stainless rub rails
- (2) Four blade props (recently tuned)
- Varnished teak cap rails, handrails, & coaming boards (recent varnish work completed —toe/hand rails done 6/2024)
- Natural teak cockpit, foredeck, Portuguese bridge, & side decks (recently sanded in 2024)
- Stainless steel handrails inboard along side decks and Portuguese bridge
- Fiberglass swim platform with teak-decking, stainless steel staple handrail, & swim ladder
- Aft cablemaster (70’) shore power housed in molded port cockpit seat; matching cockpit seat on opposite side with storage
- Cockpit control station to starboard with engine & thruster controls, engine start/stop, & autopilot
- Cockpit step ladder to flybridge—at port side
- Cockpit built-in cooler/ice box to port side – beneath step ladder
- (4) Rod holders on cockpit coaming boards
- Hot & cold freshwater wash down in cockpit
- Forward, fresh & raw water hose bibs
- Additional stainless steel grab rails at Porguese bridge side decks & transition to foredeck
- Bow pulpit with Lofrans windlass
- Primary anchor: 100 lbs Ultra anchor (2019) with 300’ of 3/8” ACCO high tension chain—includes flip swivel & anchor snubber (2019)
- Forward shore cord connect
- (4) Side entry gates—two at raised Portuguese bridge, two at cockpit-level side decks
- New aft and side deck exterior lighting (6/2024)
- Fiberglass hardtop, radar arch, & custom hinged mast
- Fourth control station at aft boat deck
Superior systems and engineering are key elements for Fleming Yachts, whose philosophy has always been to choose only the best equipment available and have it be readily accessible for maintenance. The main engine room access is from two outside hatches just aft of the salon doors. The salon floor panels can also come apart for greater access to the engine room when needed. Air intake for the engines is accomplished through openings underneath the cockpit coaming boards which then travels through the lazarette and then to the engines thus allowing for less salt to come in contact with the engine components. To achieve the extremely low sound and vibration that Flemings are known for, Aqua-Drive thrust-bearing systems transfer the thrust directly to the hull and the engine is isolated by using soft engine mounts.
Aft of the engine room, the lazarette houses the water tanks, steering gear, and air conditioning compressors while also leaving ample room for storing cruising gear such as deck chairs, spare anchors, rode, lines, fenders, and extra parts. Having the air conditioning compressors located here instead of in a hot engine room improves performance and efficiency while minimizing noise. Additionally, all battery isolation switches are accessible from outside the engine-room.
- Main engine service completed—June 2024
- (2) Cummins 500QSC—turbocharged and after cooled, common rail engines at 500 hp each (~2,600 hours each)
- (2) Reverso electric oil change system & fuel transfer system
- Dual Racor primary filters for engines
- Air Seps installed on main engines
- Aqua-Drive thrust bearing system
- Automatic engine room fire extinguisher
- Hand held fire extinguishers throughout
- Glendinning controls at all four helms
- Sidepower 15 hp 24v bow thruster
- Sidepower 10 hp 24v stern thruster
- Hynautic hydraulic steering
- Trim tabs with indicators
- Naiad Multisea II hydraulic stabilizers (7.5 SF Fins)
- FCI watermaker
- Reverse cycle A/C with 5 zones and SMX controls (new HVAC units: guest cabins & pilothouse / other 3 units serviced—2024)
- Manual whale pump
- New water pump (2024)
- Computank fuel & water gauges
- (4) Fiberglass fuel tanks (1,000 Gal Total)
- (4) Polypropylene water tanks (300 Gal Total)
- Black water tank (100 Gal Total)
Electrical Systems:
- Gen set service complete—June 2024
- Port generator: Onan 17 KW (~3,500 hours)
- Starboard generator: Onan 9 KW (~3,500 hours)
- Both gens recently serviced 08-2023
- AC/DC electrical panel with circuit breakers
- 220V AC electrical service
- 24V DC electrical service
- Outback Inverter—3,000 watt / 70 amp charger (2023)
- (2) Charles Industries Iso-Boost Transformers
- Charles AC Master Controller (auto switching)
- (8) House & (4) engine start battery banks
- Flybridge 12v Lifeline battery (new 2024)
- Paralleling solenoids and switches
- Forward & aft shore connect
- Glendinning Cablemaster with 50 amp cable—70’
- New exterior lighting (2024)
Lazarette:
- Fiberglass cockpit hatches with teak facing
- Intake vents for engine room
- DC Lighting
- Plastic Water tanks (4) with sight gauges
- AC compressors
- Main engine mufflers
- Vast storage capabilities
Cruising Equipment:
- Life jackets & ring buoy
- Dock Lines
- Fenders
- Shore cords (50A 220V)
- Flares
- EPIRB
- Switlik life raft
Canvas:
- Flybridge console cover (new)
- Flybridge helm seat cover
- Flybridge cushions & covers
- Boat deck aft control station cover (new)
- Tender canvas cover with U-zip (new 2024)
- Windshield cover
Upgrades / Recent Work:
- Installed Starlink for wifi (2023)
- New Miele oven in galley
- New galley Fisher-Paykel fridge/freezer
- Life raft re-certified
- (2) New hailers
- (2) new HVAC systems (guest cabins & pilothouse)
- Re-caulked all windows/doors
- Replace (2) Batteries & added a charger
- Shore power breaker box adjustments
- New flagpole
- New exterior Lights
- New VHF radio
- New carpeting throughout
- Headboards redone
- Sonos system installed
- (4) Cameras & CCTV recording system added
- Added (4) new TVs throughout
- Prop tuning
- Added anchor chain counter
- Replaced CO detectors
- Sanded & partially re-caulked teak decks (2024)
- Varnished toe/hand rails (6/2024)
- Modern stainless steel Fleming pilaster emblems (2023)
- New freshwater pump
- New salt water pump
- Updated Fire extinguishers/system
- Full dinghy service (6/2024)
- Ceramic Coating applied to full exterior (3/2024)
- New tender canvas cover
- New aft station canvas cover
- New flybridge helm canvas cover
- Main engines & Gen sets service (6/2024)
- Injectors, tappets, rockers, valves—all serviced/replaced on starboard engine (2023)
- (2) Torsional dampers for main engines & transmissions (2023)
- (2) New exhaust hoses for gens (2023)
- Other misc service work & electrical additions
Exclusion List:
The following do not convey in the sale
- All owner’s personal belongings, gear, tools, artwork, décor, deck furniture, galley-ware, etc
- (2) Nameboards
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.