Entering from the aft cockpit deck you are immediately greeted with a capacious salon. Featuring the timeless appeal of teak cabinetry, vast windows, teak sole with holly accents, and most importantly, an interior layout that balances form with function. This layout allows for an open social environment while keeping the function of the galley separated from the rest of the salon. With a 16’ beam and spacious open floor plan encompassing the salon with the galley, entertaining guest becomes effortless.

Starting at the aft-port side corner of the salon is an end table storage cabinet followed by a large L-shaped settee. The settee wraps inboard around the edge of the galley peninsula counter-top and is complimented by a teak hi-lo table. The starboard side consists of two freestanding upholstered chairs which, along with the port side settee, provides comfortable salon seating for six. An entertainment center to the starboard aft corner features audio-video equipment custom fit behind a teak cabinet and a 32” Samsung HD TV situated on a retractable TV lift. Salon storage is found within the full length credenza at starboard, as well as through cavities beneath port-side settee and within the upholstered chairs.

• 32” Samsung HD LED TV installed on retractable Bennett TV Lift
• KVH TracVision M5 Sat TV
• Wired for TV receivers
• DVD/Blu-ray player & CD player
• Russound Audio/Video with 6-zone Interface (salon, pilothouse, flybridge, cockpit, and all three staterooms)
• Salon speakers overhead
• Teak Hi-Lo coffee/dining table
• L-shaped settee along port side
• (2) Upholstered chairs
• Full-length credenza to starboard
• Custom salon screen door & privacy shade
• Teak & holly sole with carpeting (carpet replaced in 2021)

The galley is tucked to the port side just forward of the salon, which is separated by a large granite countertop peninsula and overhead galley cabinets. Within the inboard overhead cabinet is a dumbwaiter that can be accessed from the flybridge. Wrapping around the U-shaped counter of the galley you will find a Miele dishwasher, a Silagranite double bowl sink, a 3-burner cooktop with custom pot holders, a trash compactor, and a convection microwave overhead. Teak cabinets fill in the rest of the galley including a storage compartments just forward of the cook top that can accommodate a full range of cookware. Across to the opposing starboard side is a dish storage compartment, additional storage drawers, and a full-sized French door refrigerator.

• Sharp Carousel convection microwave—black
• Cooktop—(3) burner – 220v
• Silagranite double bowl sink—Grohe mixer faucet
• Insinkerator waste disposal
• Miele dishwasher—teak faced
• Broan trash compactor—teak faced
• Granite counter tops with teak bullnose
• Dumb-waiter in overhead cabinet leads to flybridge
• Teak faced 23.3 Cu. Ft. French door refrigerator
• Dish storage locker with custom china storage pegs —China plates/dishes included
• Teak & holly sole with carpeting

Following the five short steps straight down from the salon will lead you to the central passage of the accommodations. This traditional layout has been a signature mainstay in the Fleming 55 and provides an easy and convenient flow of traffic throughout the boat. The central accommodations passage also makes it possible to appreciate the full length of the vessel from forepeak bulkhead to transom. Once in the passageway you will find an two bunk arrangement within the starboard cabin, along with a VIP guest stateroom to port featuring two twin-sized berths and a third overhead bunk. Just forward of the starboard side stateroom in the passageway is a full-sized Bosch Axxis 220v washer & separate dryer followed by the guest head. The en-suite master stateroom with a island-queen berth tops off the accommodations at the forward peak.

The master stateroom is composed of a queen sized island berth surrounded by shelves, cabinets, drawers, and his & hers hanging lockers to each side. The island berth arrangement allows for access from either side and the berth can be raised with a hydraulic lift to access a large storage cavity underneath, perfect for storing extra bed linens or keeping valuables out of sight. Over head are two skylight hatches which along with port holes, provide natural light to the cabin. In between the two skylights is an emergency escape hatch that leads to the foredeck of the vessel. To the port side of the stateroom is a wall-mounted 22” Samsung HD TV and access to the master head.

Both the master and guest heads are exceptionally spacious and feature one-piece molded fiberglass shower stalls, glass and stainless steel shower enclosures, mirrored vanities with Grohe thermostatic controlled fixtures, Headhunter systems, and granite countertops.

The port stateroom features two twin-sized berths with a night stand in-between and a third slide-out bunk overhead to outboard. At the foot of both berths is a wall mounted 19” HD TV and a large hanging locker with dresser drawers below. Additional drawers are found beneath the berths and more storage in provided by the shelving along the walls overhead. The starboard cabin features a two bunk arrangement with storage drawers beneath, a large hanging locker, and a full length mirror.

In many modern yacht designs it has become commonplace to eliminate the inside steering station, however the Fleming 55 features a dedicated pilothouse which closely resembles the bridge of a much larger vessel. This dedicated pilothouse takes the role as the primary location to control the boat without any distractions from other on-board activities. With that said, it remains only three short steps up from the salon & galley and it is only another four interior steps up to the flybridge.

Visibility forward and wrapping around to port and starboard windows is excellent. Below the expansive windshield are consoles which provide ample room for a full range of modern electronics and equipment without intruding on the engine instrumentation. Overhead consoles provide additional space for equipment within easy reach. Both AC and DC electrical breaker panels are below the console to either side and can swing out to provide access to wiring connections and backside of displays. There is a proper chart area to the starboard side with large drawers for maps, cruising guides, navigation instruments, binoculars, and other necessities. Centered along each port and starboard side of the pilothouse are sliding doors that lead out to the side Portuguese decks. To the aft of the port side-door resides a raised L-shaped settee and table which provides a comfortable social area with phenomenal visibility while underway. Aft of the starboard side-door you will find additional storage through a hanging locker and extra drawers. A large stainless steel teak-trimmed destroyer wheel and Stidd helm chair finish off the pilothouse and perfectly accent this ultimate cruising yacht.

• Furuno Radar—6’ open array
• Furuno NavNet 3D Black Box
• (2) NEC 21” monitors—to display NavNet 3D
• Navnet TZ Touch 14” stand-alone unit (to starboard)
• Furuno GP-33—second GPS
• (2) Furuno RD33 data units
• Furuno Autopilot NavPilot 700
• Furuno AIS FA-150
• (2) Icom M604 VHF with hailer and command-mic in e-room
• Glendinning engine controls
• (2) SmartCraft digital engine displays
• Boning system display
• Destroyer wheel—stainless with teak accents
• Sidepower bow & stern thruster controls
• Naiad stabilizer controls (7.5 sq. ft. fins)
• Bennett trim tab controls
• 19” Samsung HD TV—to port side
• CCTV with (4) cameras—dedicated Ikegami color monitor at overhead console (2022)
• ACR spot light controls
• Auto-Anchor control
• Outback inverter control panel
• FCI watermaker control
• Aigean wifi booster (April 2018)
• Iridium SAT phone (hidden in cabinet behind settee), with exterior antenna
• Eartec wireless communication headsets
• Ritchie compass
• Russound control
• Stidd helm chair
• Raised corner settee & table to port corner
• Pilothouse storage and hanging locker to starboard aft corner
• Teak & holy sole with carpeting
• Flybridge access via steps aft of helm

The flybridge is easily accessed from the interior steps in the pilothouse or by the ladder from the cockpit. It features a two-seat upper helm station located to port that provides excellent visibility particularly in close quarters and bustling harbors with its 360 degree view. The electronics console is large enough to house an array of equipment with easy access to the rear of the console available by hinging open the bookshelf behind the pilothouse settee below. The starboard side of the flybridge features a wrap-around settee and a fixed fiberglass table with a custom teak top. Aft of the helm to the port side will find the hatch for the galley dumbwaiter followed by an additional settee. The following aft boat deck features a Steelhead 1,000 lbs hydraulic davit, mounted tender chocks, and a 12’ AB tender. The aft docking station, flybridge freezer, and hatch & step ladder to the cockpit resides to the aft port side. Overhead, a custom fiberglass hardtop with stainless steel supports is attached to the radar arch, which in turn supports the custom hinged mast, domes, and open array. A full enclosure around the hardtop protects the flybridge area from the elements.

Flybridge Helm:

• (2) Furuno NavNet TZT14 stand alone multifunctional 14” displays
• Furuno NAVpilot autopilot
• Furuno RD33
• ICOM VHF M506
• (2) SmartCraft digital engine displays
• Stainless destroyer wheel
• Engine start/stop
• Glendinning engine controls
• Sidepower bow thruster controls
• Bennett trim tab controls
• Russound control panel
• ACR searchlight control
• Auto-Anchor control

Flybridge Features:

• Fiberglass hardtop with stainless skylights and stainless supports
• Plexiglass windshield with stainless handrail
• Ful EX2CY enclosure around flybridge
• Steering console with controls and engine instrumentation—bench seat
• U-shaped settee to starboard
• Additional settee to port
• Cushioned flybridge seating for 9 people—storage beneath settees and helm bench
• Molded fiberglass table with teak table top
• Flybridge dumbwaiter—leads to galley overhead
• Freshwater wash down
• 406 EPIRB with GPS
• Switlik 6-man life raft
• 5.3 Cu Ft freezer with custom cover
• Steel Head ES1000 – 1,000 lb electric hydraulic davit w/power rotation, slewing, hoisting
• Tender: 12’ AB RIB with Garmin chartplotter & 40 hp Yamaha outboard
• Aft docking station—thruster & engine controls
• Hatch/ladder leading down to cockpit
• Non-skid flybridge & aft boat deck
• Enclosed flybridge deck features outdoor carpeting
• LED courtesy lighting

In common with all Flemings, the hull is hand laid and solid fiberglass reinforced with a grid of stringers and frames. Vinylester resin is utilized below and above the waterline on the hull with further protection provided by epoxy barrier coats. A reasonable five foot draft allows for Bahamas cruising while ensuring that the running gear is protected by a full-length keel which is foam filled and glassed across the top to isolate it from the hull. This keel provides nearly a foot length of protection before the running gear.

On deck she has the mainstay natural teak walk-around decks and in combination with high bulwarks and a Portuguese bridge, security for both children and pets is ensured. All of the cap rails, trim, and coaming boards throughout are comprised of Burrwood synthetic-teak. The cockpit features a control station located starboard of the salon doors while additional storage is to port behind the ladder that leads up to flybridge. On the cockpit deck are four gasketed and lockable hatches that provide access to the engine room and spacious lazarette. The transom of the cockpit features a large gate that swings in to allow ingress to the swim platform.

Moving forward along the side decks you will discover entry gates on either side of the cockpit side decks. These gates provide lower entry close to the water line, meanwhile additional gates on either side of the raised non-skid Portuguese bridge give the option for a higher point of entry. Up to the bow will bring you to a natural teak foredeck with Burrwood handrails. Special attention has been paid to the ease and safety in which the heavy duty ground tackle is set and retrieved. The anchor platform accepts two anchors, each of which can be controlled by a handheld unit at the platform or by controls at both the pilothouse and flybridge helm stations. The anchor locker directly beneath the pulpit can serve as a great place for fender storage as well. Furthermore the inside wall of the Portuguese bridge includes two storage cabinets that give convenient storage for dock lines, windshield covers, and cleaning supplies.

• Built to European CE certification standards for ocean class
• Hand-laid solid fiberglass hull
• Vinylester resin used throughout entire boat
• Stainless steel protective shoe on keel
• Simulated planking grooves in hullside
• Integrated molded guards with stainless rub rails
• Four blade props
• Heavy duty pantograph windshield wipers
• Burrwood synthetic-teak cap rails, trim, and covering boards
• Stainless steel handrails inboard along side decks and Portuguese bridge, outboard at transom
• Teak cockpit & side decks
• Teak Portuguese bridge & foredeck with Burrwood handrail surrounding
• Escape hatch at foredeck (from master stateroom)
• Forward, fresh & raw water hose bibs
• Forward shore connect
• Bow pulpit with Lofrans windlass
• Ultra anchor—77 lbs CQR with 300’ of 3/8” ACCO high tension chain
• Secondary anchor: (2) Fortress FX-55—with chain & rode—one mounted and one spare
• Fiberglass non-skid swim platform with (2) fold-up cleats & swim ladder
• Aft cablemaster (70’) shore power housed in molded port cockpit seat; matching cockpit seat on   opposite side with storage hatch
• Cockpit control station to starboard with engine & thruster controls, engine start/stop, & autopilot
• Cockpit step ladder (Burrwood steps) to flybridge to port side—with storage beneath
• (4) Gasketed hatches on cockpit deck—engine room & lazarette access
• (4) Rod holders at cockpit combing boards
• Hot & cold freshwater wash down in cockpit
• (4) Side entry gates—two at raised Portuguese, two at cockpit-level side decks
• Fiberglass hardtop, radar arch, custom hinged mast

Superior systems and engineering are key elements for Fleming Yachts, whose philosophy has always been to choose only the best equipment available and have it be readily accessible for maintenance. The main engine room access is from two outside hatches just aft of the salon doors. The salon floor panels can also come apart for greater access to the engine room when needed. Air intake for the engines is accomplished through openings underneath the cockpit coaming boards which then travels through the lazarette and then to the engines thus allowing for less salt to come in contact with the engine components. To achieve the extremely low sound and vibration that Flemings are known for, Sea Torque fixed shaft drive system transfers the thrust directly to the hull and the engine is isolated by using soft engine mounts.

Aft of the engine room, the lazarette houses the water tanks, steering gear, and air conditioning compressors while also leaving ample room for storing cruising gear such as deck chairs, spare anchors, rode, lines, fenders, and extra parts. Having the air conditioning compressors located here instead of in a hot engine room improves performance and efficiency while minimizing noise. Additionally, all battery isolation switches are accessible from outside the engine-room.

• (2) Cummins QSC 8.3 – turbocharged & aftercooled, common rail 500 hp each (~ 4,000 hours)
• Cummins 1,000 hour service including after-coolers, cleaning, belts, hoses, etc—completed August 2021
• Glendinning controls at all 4 helm stations
• (2) Reverso electric oil change system
• Dual Racor primary filters for engines (75/1000 Max)
• Fuel polishing system
• Air Seps installed on main engines
• Sea Torque BOSS Fully Enclosed Fixed Shaft Drive system—major 10-year service completed August 2021
• Sidepower electric bow & stern thrusters—24v
• Naiad Multi-Sea II stabilizers (7.5 SF Fins) – 1,000 hour service including lower seals completed August 2021
• Hynautic hydraulic steering
• Bennett trim tabs with indicators
• Manual/Automatic Clean Agent fire extinguishing system
• (4) Fiberglass fuel tanks (1,000 Gal Total)
• (4) Polypropylene water tanks (300 Gal Total)
• Black water tank (100 Gal Total)
• FCI Max-Q water maker—1200 GPD (pickled sept 2021)
• 5 Zone Air Con with electric heat in salon & master
• Auxiliary back-up AC pump installed
• (2) Fresh water pumps—24v (replaced/rebuilt Sept 2022)
• Salt water pump—24v
• Torrid water heater—220v

Electrical Systems:

• Port generator: Onan 17 Kw eQD (~ 4,600 hours) – 1,000 hour service completed August 2021
• Outback Inverter—3,500 watt
• (2) Charles Iso-Boost Transformers
• Charles AC Master Controller (auto switching)
• 220V AC electrical service
• 24V DC electrical service
• House & inverter battery banks (replaced August 2021)
• Paralleling solenoids and switches
• Forward & aft shore connect
• Glendinning Cablemaster with 50 amp cable—70’

Cruising Equipment:

• Life Jackets & Ring Buoy
• Dock Lines, Fenders & Fender Lines
• (2) Shore cord—50’
• Flare kit
• 406 EPIRB with GPS
• Ultra anchor—77 lbs
• (2) Fortress FX-55 anchor—one mounted & one spare
• Wetspot water softener unit
• Magma grill (stored in lazarette)
• Misc spare parts
• Cockpit sunshade with poles
• Teak deck chairs & tables

Exclusion List:

• (2) Nameboards & the name of the vessel do not convey
• All owner’s personal belongings, décor, artwork, etc
• Ship’s bell